Recommended use for vegetable cultivation
Before planting vegetable seedlings, 30-40 g AnniBAT bat guano are sprinkled into the planting holes. The seedlings are then inserted. The planting hole is closed with soil and watered. 7-8 days after this treatment, add 1 kg of bat guano in 40 litres of water and leave it for about 3-4 days. Stir the mixture again before use. Use 400-500 cc per seedling. This treatment should be repeated every 7-8 days until the harvest. If the application is by drip irrigation, we recommend that the mixture be sifted beforehand.
Recommended use for trees and newly planted tree saplings
Before planting the tree saplings 100-150 g AnniBAT bat guano are sprinkled into the planting holes. The saplings are then implanted. In the case of older trees, the soil around the tree trunk is loosened up to 10-15 cm in the size of the deciduous fall area beginning with autumn. AnniBAT bat guano is sprinkled into this circle. The treated area is then sealed with soil and watered. For each year of the tree’s life 100-150 g AnniBAT bat guano is calculated. In spring, 100-120 g of bat guano can be dissolved in water at a ratio of 1:40 per year of the tree’s life and used 2-3 times at intervals of 20-25 days.
Recommended for pot and garden flowers
For a 5 litre pot 100 g AnniBAT bat guano are mixed with peat or suitable soil and put into the pot. The flower can then be implanted. 25-30 days after planting, a teaspoon of AnniBAT bat guano is dissolved in a glass of water and poured onto the plant root. In the case of garden plants, the ratio of plant size can be increased accordingly.
Recommended use for lawns
Newly planted lawns
The area to be planted with grass is initially prepared as usual. The soil is harrowed and digged out about 4 fingers wide. Approx. 100 g AnniBAT bat guano per square meter are used.
AnniBAT bat guano is mixed with the grass seeds and spread evenly. The excavated soil is then sprinkled onto the mixture of seed and fertiliser and watered for the first time. A week after this application, water is re-applied. For this purpose, 100-150 g of bat guano per square metre are dissolved in water at a ratio of 1:20. This application in water is repeated twice a week.
Immediately after the first mowing, water again with loosened bat guano. After each lawn mowing, the solution of bat guano is applied in a ratio of 50 cc to one square meter of water.
Damaged areas regenerate very quickly after application of AnniBAT bat guano.
Already planted unhealthy lawns
AnniBAT bat guano can be used for repair of already planted but unhealthy lawn areas, as long as the lawn has not been completely dried up or almost dried up. In addition to AnniBAT bat guano, a correspondingly large, sunproof tarpaulin (preferably black) is required for this. 100-150 g AnniBAT bat guano are initially administered to the damaged lawn areas per square metre. It is important to apply the fertiliser evenly. The treated surface is then watered with clear water and covered with a sunproof nylon tarpaulin. The nylon tarpaulin is removed for daily washing. After the watering, the surface is covered with the tarpaulin again. After one week, the tarpaulin is completely removed and watering is carried out with a 1:20 AnniBAT batguano-water mixture of 100-150 cc per square meter. This treatment is repeated for one week. At the end of this measure, the lawn will grow healthy and green again. After the first lawn mowing, the AnniBAT bat guano water mixture is reapplied. After each lawn mowing, the lawn is then rinsed with a 1:40 AnniBAT bat guano water mixture, with a charge of 50 cc per square metre.
Already planted healthy lawns
For healthy lawn areas that have already been planted, it is sufficient to carry out one application of an AnniBAT bat bat guano-water mixture in a ratio of 1:40 with 100 cc per square meter for 3 or 4 weeks.
Normal Application
In normal soils that are planted every year, AnniBAT bat guano is spread before sowing or planting and after ploughing the soil. On average, this is 40 grams per square meter (400 kg on 1 hectare). The soil is then ploughed and irrigated again.
After ploughing, the bat guano is used as follows, depending on the condition of the soil:
POWDER AnniBAT organic bat fertiliser application table:
FRUIT – VEGETABLES – TUBERS 500 kg 1 hectare
CEREALS – COTTON – SUNFLOWERS – PLANTS WITH GRAINS 500
kg 1 hectare
EVERY YEAR PLANTED HUMUS-RICH SOILS 300
kg 1 hectare
After planting with new fruit and vegetables, the soil is irrigated once with AnniBAT bat guano diluted in water in a ratio of 1:25 (1 kg AnniBAT bat guano diluted in 25 litres of water). The use of artificial or other natural fertilisers, as well as hormone-containing other fertilisers is not necessary.
PLANT TO BE USED BEFORE PLANTING AFTER PLANTING
TUBEROUS PLANTS
(potatoes, onions, carrots, celery etc.) Spread 250 kg per hectare into the seedbed. AnniBAT bat guano is diluted in a ratio of 1:50 (1 kg to 50 l water) and sprayed onto the leaves.
After 15 – 20 days, add 1:50 diluted bat guano (1 kg per 50 litres of water) to the plant root in a ratio of 150 – 200 ml per plant.
CEREALS AND OTHER FIELD CROPS
(cotton, barley, wheat, oats, maize, sunflowers etc.) Spread 250 kg per hectare into the seedbed. If the plants have a height of 1 hand span, the leaves are poured in a ratio of 1:50 diluted AnniBAT bat guano (1 kg per 50 l of water). This process is repeated after 3 weeks.
In addition, when the plants have reached a height of 40 cm, two times in an interval of one week, in a ratio of 1:50 diluted AnniBAT bat guano is added to the plant roots.
FIELD VEGETABLES
(tomatoes, peppers, aubergines, cucumbers, beans, soybeans, okra, chickpeas, leek, artichokes, cauliflower, broad beans and others) Spread 400 kg into the rows of plants on 1 hectare or sprinkle 30 – 40 g into the holes for the seedlings. When the plant has reached the size of a seedling, a solution in a ratio of 1:40 is applied 1 time in a spray process.
Before flowering, dilute 500 lt in a ratio of 1:40 to
1 hectare applied in the irrigation process. At the beginning of the fruit formation, 10 l dilution in a ratio of 1:40 is applied once a week.
ORCHARDS Before planting the seedlings, 100 – 120 g are sprinkled into the planting holes. If trees are already planted, fertiliser is sprinkled before the rainy season during the digging of the soil and mixed with the soil by digging. The amount of fertiliser is calculated at 100 g per each year of the tree’s life.
VINEYARDS Before the seedlings are planted in the vineyards, 80 – 100 g are sprinkled into the planting holes. When pruning, 200 g of fertiliser powder is applied to each vine with digging. The fertiliser is mixed well with the soil during digging.
During the sprouting period, the fertiliser is diluted once a week with the water in a ratio of 1:40.
FLOWERS AND LAWNS Spread 100 g of fertiliser into the flower beds for planting flowers. The soil is then sprinkled and the flowers are planted.
For lawn planting, 500 g of fertiliser per m² of lawn seed are mixed and sown on the prepared areas. 1 week after sowing, 500 ml of fertiliser solution in a ratio of 1:10 per m² is used for irrigation.
This is continued until the first lawn mowing, after which the amount of fertiliser solution is halved and applied further.
LIQUID AnniBAT organic bat fertiliser application table:
PLANT TO BE USED APPLICATION PERIOD TYPE OF APPLICATION DOSAGE
TOMATO, PEPPERS, CUCUMBER, AUBERGINE, LETTUCE AND OTHER SALADS The first application of the fertiliser can be carried out with the first watering after planting. The application is continued until the harvest time, increasing the dosage according to the plant’s composition. Leaf 200-300 mlt /100lt W
Soil 2-4 LT/ 1000m²
HONEYDEW MELON, WATERMELON, PUMPKIN The first application of the fertiliser can be carried out with the first watering after planting. The application is continued until the harvest time, increasing the dosage according to the plant’s composition. Leaf 200-300 mlt /100lt W
Soil 2-4 LT/ 1000m²
FRUIT TREES
apple, pear, apricot, cherry, plum, peach, walnut, almond The application of the fertiliser starts with the first watering and is repeated once every 15 days until the harvest. Leaf 200-300 mlt /100lt W
Soil 5-8 LT/ 1000m²
CITRUS
orange, tangerine, lemon, grapefruit The application of the fertiliser starts with the first watering and is repeated once every 15 days until the harvest. Leaf 200-300 mlt /100lt W
Soil 5-8 LT/ 1000m²
LEGUMES After the plant has 5-6 leaves, the fertiliser is applied once every 15 days in water. Leaf 200-300 mlt /100lt W
Soil 2-4 LT/ 1000m²
ONION, GARLIC The first application of the fertiliser can be carried out with the first watering after planting. The application is continued until the harvest time, increasing the dosage according to the plant’s composition. Leaf 200-300 mlt /100lt W
Soil 2-4 LT/ 1000m²
(with the irrigation water)
VINEYARD The fertiliser can be applied during the entire growing season. As long as the grapes are still unripe, the dosage can be gradually increased. Leaf 200-300 mlt /100lt W
Soil 2LT/ 1000m²
COTTON 1. When the flowering is visible
2. Before capsule formation Leaf 200-300 mlt /100lt W
Soil 2-4 LT/ 1000m²
(with the irrigation water)
OLIVE 1. during the flowering period
2. during fruit formation
3. before the pits become hard Leaf 200-300 mlt /100lt W
Soil 2-4 LT/ 1000m²
(with the irrigation water)
TOBACCO When the plant is 10 cm high, the application of fertiliser is started and carried out for 15 days. Leaf 200-300 mlt /100lt W
Soil 2-4 LT/ 1000m²
CEREAL
Wheat, rice, barley, oats, rye The fertiliser can be applied with the irrigation water at every watering. Where irrigation is carried out by irrigation, 10 – 15 minutes of clean water is administered after application of the fertiliser. Leaf 200-300 mlt /100lt W
Soil 2-4 LT/ 1000m²
(with the irrigation water)
SUGAR BEET,
POTATO The fertiliser can be applied with the irrigation water at every watering. Where irrigation is carried out by irrigation, 10 – 15 minutes of clean water is administered after application of the fertiliser. Leaf 200-300 mlt /100lt W
Soil 2-4 LT/ 1000m²
(with the irrigation water)
SUNFLOWER, CORN The fertiliser can be applied with the irrigation water at every watering. Where irrigation is carried out by irrigation, 10 – 15 minutes of clean water is administered after application of the fertiliser. Leaf 200-300 mlt /100lt W
Soil 2-4 LT/ 1000m²
(with the irrigation water)
• Keep away from children and food.
• Do not inhale
• Wear gloves
• Store in the original packaging and in a dry place.
• Keep away from pets.
• Wash hands after use.
• Do not exceed the recommended dosage.